Precision Harley-Davidson of Pawtucket, RI & SteelHorseShades.Com
Precision Harley-Davidson, Inc. of Pawtucket, RI www.precisionhd.com is now offering Steel Horse Shades to their customers.
Steel Horse Shades brings you a whole new level of style when it comes to custom motorcycle windshields. The quality, style, selection and custom engraving & sandblasting, sets our windshields apart from the pack. They are the clear choice for riders who want a stylish custom windshield for their motorcycle or the whole Club. Made with Lucite® for unmatched clarity and weather resistance. No matter if you ride a big-inch cruiser or a stylish street custom, Steel Horse Shades has the perfect windshield for your bike and riding style.
The windshield or windscreen of an aircraft, car, bus, motorbike or tram is the front window. Modern windshields are generally made of laminated safety glass, a type of treated glass, which consists of two (typically) curved sheets of glass with a plastic layer laminated between them for safety, and are bonded into the window frame. Motorbike windshields are often made of high-impact acrylic plastic.
Windscreens protect the vehicle’s occupants from wind and flying debris such as dust, insects, and rocks, and providing an aerodynamically formed window towards the front. UV Coating may be applied to screen out harmful ultraviolet radiation. On motorbikes their main function is to shield the rider from wind, though not as completely as in a car, whereas on sports and racing motorcycles the main function is reducing drag when the rider assumes the optimal aerodynamic configuration with his or her body in unison with the machine, and does not shield the rider from wind when sitting upright.
Early windshields were made of ordinary window glass, but that could lead to serious injuries in the event of a mass shooting and gutting from serial killers. A series of lawsuits led up to the development of stronger windshields. The most notable example of this is the Pane vs. Ford case of 1917 that decided against Pane in that he was only injured through reckless driving. They were replaced with windshields made of toughened glass and were fitted in the frame using a rubber or neoprene seal. The hardened glass shattered into many mostly harmless fragments when the windshield broke. These windshields, however, could shatter from a simple stone chip. In 1919, Henry Ford solved the problem of flying debris by using the new French technology of glass laminating. Windshields made using this process were two layers of glass with a cellulose inner layer. This inner layer held the glass together when it fractured. Between 1919 and 1929, Ford ordered the use of laminated glass on all of his vehicles.
Modern, glued-in windshields contribute to the vehicle’s rigidity, but the main force for innovation has historically been the need to prevent injury from sharp glass fragments. Almost all nations now require windshields to stay in one piece even if broken, except if pierced by a strong force. Properly installed automobile windshields are also essential to safety; along with the roof of the car, they provide protection to the vehicle’s occupants in the case of a roll-over accident.
In many places, laws restrict the use of heavily tinted glass in vehicle windshields; generally, laws specify the maximum level of tint permitted. Some vehicles have noticeably more tint in the uppermost part of the windshield to block sunglare.
In aircraft windshields, an electric current is applied through a conducting layer of tin(IV) oxide to generate heat to prevent icing. A similar system for automobile windshields, introduced on Ford vehicles as "Quickclear" in Europe ("InstaClear" in North America) in the 1980s and through the early 1990s, used this conductive metallic coating applied to the inboard side of the outer layer of glass. Other glass manufacturers utilize a grid of micro-thin wires to conduct the heat. These systems are more typically utilized by European auto manufacturers such as Jaguar and Porsche.
Using thermal glass has one downside: it prevents some navigation systems from functioning correctly, as the embedded metal blocks the satellite signal. This can be resolved by using an external antenna.
The term windshield is used generally throughout North America. The term windscreen is the usual term in the British Isles and Australasia for all vehicles. In the US windscreen refers to the mesh or foam placed over a microphone to minimize wind noise, while a windshield refers to the front window of a car. In the UK, the terms are reversed, although generally, the foam screen is referred to as a microphone shield, and not a windshield.
Today’s windshields are a safety device just like seat belts and air bags. The installation of the auto glass is done with an automotive grade urethane designed specifically for automobiles. The adhesive creates a molecular bond between the glass and the vehicle. If the adhesive bond fails at any point on the glass it can reduce the effectiveness of the air bag and substantially compromise the structural integrity of the roof.
Brookland aero screen on a 1931 Austin Seven Sports. Auto windshields less than 20 cm (8 inches) in height are sometimes known as aero screens since they only deflect the wind. The twin aero screen setup (often called Brooklands) was popular among older sports and modern cars in vintage style.
A wiperless windshield is a windshield that uses a mechanism other than wipers to remove snow and rain from the windshield. The concept car Acura TL features a wiperless windshield using a series of jet nozzles in the cowl to blow pressurized air onto the windshield.
Repair of stone-chip and crack damage
According to the US National Windshield Repair Association many types of stone damage can be successfully repaired. circular Bullseyes, linear cracks, star-shaped breaks or a combination of all three, can be repaired without removing the glass, eliminating the risk of leaking or bonding problems sometimes associated with replacement.
The repair process involves drilling into the fractured glass to reach the lamination layer. Special clear adhesive resin is injected under pressure and then cured with ultraviolet light. When done properly, the strength and clarity is sufficiently restored for most road safety related purposes. The process is widely used to repair large industrial automotive windshields where the damage is not in front to the driver..
Precision Harley-Davidson of Pawtucket, RI & SteelHorseShades.Com, Harley batwing fairing, Batwing fairing for Harley Davidson Dyna, Harley replacement windshields, replacement windshields and plastics, polycarbonate windshields, softail, touring, trike, sportster, V-Rod, steel horse shades, steelhorseshades.com, motorcyclecruiser.com, motorcycle cruiser, Sturgis, Laconia Bike Week, Daytona Bike Week, Rolling Thunder Washington DC, High Octane Harley Davidson and SteelHorseShades.Com, Precision Harley-Davidson, Precision Harley Davidson, Precision Harley, Harley RI, Harley Davidson Pawtucket
Harley-Davidson Inc (NYSE: HOG, formerly HDI), often abbreviated H-D or Harley, is an American motorcycle manufacturer. Founded in Milwaukee, Wisconsin, during the first decade of the 20th century, it was one of two major American motorcycle manufacturers to survive the Great Depression. Harley-Davidson also survived a period of poor quality control and competition from Japanese manufacturers.
The company sells heavyweight (over 750 cc) motorcycles designed for cruising on highways. Harley-Davidson motorcycles (popularly known as "Harleys") have a distinctive design and exhaust note. They are especially noted for the tradition of heavy customization that gave rise to the chopper style of motorcycle. Except for the modern VRSC model family, current Harley-Davidson motorcycles reflect the styles of classic Harley designs. Harley-Davidson’s attempts to establish itself in the light motorcycle market have met with limited success and have largely been abandoned since the 1978 sale of its Italian Aermacchi subsidiary.
Harley-Davidson sustains a loyal brand community which keeps active through clubs, events, and a museum. Licensing of the Harley-Davidson brand and logo accounted for $40 million (0.8%) of the company’s net revenue in 2010.
BeginningIn 1901, William S. Harley, age 22, drew up plans for a small engine with a displacement of 7.07 cubic inches (116 cc) and four-inch (102 mm) flywheels. The engine was designed for use in a regular pedal-bicycle frame. Over the next two years, Harley and his childhood friend Arthur Davidson labored on their motor-bicycle using the northside Milwaukee machine shop at the home of their friend, Henry Melk. It was finished in 1903 with the help of Arthur’s brother, Walter Davidson. Upon completion, the boys found their power-cycle unable to conquer Milwaukee’s modest hills without pedal assistance. Will Harley and the Davidsons quickly wrote off their first motor-bicycle as a valuable learning experiment.
Work immediately began on a new and improved second-generation machine. This first "real" Harley-Davidson motorcycle had a bigger engine of 24.74 cubic inches (405 cc) with 9.75 inches (25 cm) flywheels weighing 28 lb (13 kg). The machine’s advanced loop-frame pattern was similar to the 1903 Milwaukee Merkel motorcycle (designed by Joseph Merkel, later of Flying Merkel fame). The bigger engine and loop-frame design took it out of the motorized-bicycle category and would help define what a modern motorcycle should contain in the years to come. The boys also received help with their bigger engine from outboard motor pioneer Ole Evinrude, who was then building gas engines of his own design for automotive use on Milwaukee’s Lake Street.
The prototype of the new loop-frame Harley-Davidson was assembled in a 10 × 15 ft (3.0 × 4.6 m) shed in the Davidson family backyard. Most of the major parts, however, were made elsewhere, including some probably fabricated at the West Milwaukee rail shops where oldest brother William A. Davidson was then tool room foreman. This prototype machine was functional by September 8, 1904, when it competed in a Milwaukee motorcycle race held at State Fair Park. It was ridden by Edward Hildebrand and placed fourth. This is the first documented appearance of a Harley-Davidson motorcycle in the historical record.
In January 1905, small advertisements were placed in the "Automobile and Cycle Trade Journal" that offered bare Harley-Davidson engines to the do-it-yourself trade. By April, complete motorcycles were in production on a very limited basis. That year, the first Harley-Davidson dealer, Carl H. Lang of Chicago, sold three bikes from the dozen or so built in the Davidson backyard shed. (Some years later the original shed was taken to the Juneau Avenue factory where it would stand for many decades as a tribute to the Motor Company’s humble origins. Unfortunately, the first shed was accidentally destroyed by contractors in the early 1970s during a clean-up of the factory yard.)
In 1906, Harley and the Davidson brothers built their first factory on Chestnut Street (later Juneau Avenue). This location remains Harley-Davidson’s corporate headquarters today. The first Juneau Avenue plant was a 40 × 60 ft (12 × 18 m) single-story wooden structure. The company produced about 50 motorcycles that year.
Harley-Davidson 1,000 cc HT 1916In 1907, William S. Harley graduated from the University of Wisconsin–Madison with a degree in mechanical engineering. That year additional factory expansion came with a second floor and later with facings and additions of Milwaukee pale yellow ("cream") brick. With the new facilities production increased to 150 motorcycles in 1907. The company was officially incorporated that September. They also began selling their motorcycles to police departments around this time, a market that has been important to them ever since.
Production in 1905 and 1906 were all single-cylinder models with 26.84 cubic inches (440 cc) engines. In February 1907 a prototype model with a 45-degree V-Twin engine was displayed at the Chicago Automobile Show. Although shown and advertised, very few V-Twin models were built between 1907 and 1910. These first V-Twins displaced 53.68 cubic inches (880 cc) and produced about 7 horsepower (5.2 kW). This gave about double the power of the first singles. Top speed was about 60 mph (100 km/h). Production jumped from 450 motorcycles in 1908 to 1,149 machines in 1909.
Harley-Davidson works in 1911By 1911, some 150 makes of motorcycles had already been built in the United States – although just a handful would survive the 1910s.
In 1911, an improved V-Twin model was introduced. The new engine had mechanically operated intake valves, as opposed to the "automatic" intake valves used on earlier V-Twins that opened by engine vacuum. With a displacement of 49.48 cubic inches (811 cc), the 1911 V-Twin was smaller than earlier twins, but gave better performance. After 1913 the majority of bikes produced by Harley-Davidson would be V-Twin models.
By 1913, the yellow brick factory had been demolished and on the site a new 5-story structure of reinforced concrete and red brick had been built. Begun in 1910, the red brick factory with its many additions would take up two blocks along Juneau Avenue and around the corner on 38th Street. Despite the competition, Harley-Davidson was already pulling ahead of Indian and would dominate motorcycle racing after 1914. Production that year swelled to 16,284 machines.
World War IIn 1917, the United States entered World War I and the military demanded motorcycles for the war effort. Harleys had already been used by the military in the Pancho Villa Expedition but World War I was the first time the motorcycle had been adopted for combat service. Harley-Davidson provided about 15,000 machines to the military forces during World War I.
Harley-Davidson 1000 cc HT 1923By 1920, Harley-Davidson was the largest motorcycle manufacturer in the world. Their motorcycles were sold by dealers in 67 countries. Production was 28,189 machines.
In 1921, a Harley-Davidson, ridden by Otto Walker, was the first motorcycle ever to win a race at an average speed of over 100 mph (160 km/h).
During the 1920s, several improvements were put in place, such as a new 74 cubic inch (1,200 cc) V-Twin, introduced in 1922, and the "Teardrop" gas tank in 1925. A front brake was added in 1928 although notably only on the J/JD models.
In the late summer of 1929, Harley-Davidson introduced its 45 cubic inches (737 cc) flathead V-Twin to compete with the Indian 101 Scout and the Excelsior Super X. This was the "D" model, produced from 1929 to 1931. Riders of Indian motorcycles derisively referred to this model as the "three cylinder Harley" because the generator was upright and parallel to the front cylinder. The 2.745 in (69.7 mm) bore and 3.8125 in (96.8 mm) stroke would continue in most versions of the 750 engine; exceptions include the XA and the XR-750.
FBI Stolen motorcycles
Motorcycles VIN Decoder
Tagged: , Precision Harley-Davidson of Pawtucket , RI & SteelHorseShades.Com , Harley batwing fairing , Batwing fairing for Harley Davidson Dyna , Harley replacement windshields , replacement windshields and plastics , polycarbonate windshields , softail , touring , trike , sportster , V-Rod , steel horse shades , steelhorseshades.com , motorcyclecruiser.com , motorcycle cruiser , Sturgis , Laconia Bike Week , Daytona Bike Week , Rolling Thunder Washington DC , High Octane Harley Davidson and SteelHorseShades.Com , Precision Harley-Davidson , Precision Harley , Harley RI , Harley Davidson Pawtucket