Ford Model T Touring Type T1 1914 (2642)

Ford Model T Touring Type T1 1914 (2642)

Manufacturer: Ford Motor Company, Dearborn, Michigan – U.S.A.
Type: Model T Touring Type T1
Production time: 1908 – 1914
Production outlet: 165,832 (1914: all Touring models)
Production outlet: 202,667 (1914: all models)
Production outlet: 15,458,781 (1908-1927: all models)
Engine: 2896cc straight-4 Ford 177 CID Vertical L-head, L-block, side valves flathead
Power: 20 bhp / 1.600 rpm
Drivetrain: rear wheels
Speed: 68 km/h
Curb weight: 700 kg
Wheelbase: 100 inch
Chassis: lead frame made of riveted U-steel profiles on a wooden skeleton with separate metal planking body
Steering: planetary epicyclic gear
Gearbox: manual two-speed planetary unit with a magneto located in front of the flywheel (this magneto supplied ignition current generated in a set of stationary coils)
Clutch: multiple dry plate disc
Carburettor: Ford
Fuel tank: 38 liter (case fuel system: gravity type, no pump)
Electric system: 6 Volts
Ignition system: single trembler coil
Brakes front: non
Brakes rear: hand-operated mechanical external contracting drums
Brakes: external braking on the driveshaft
Suspension front: rigid axle, cross two push rods, transversely mounted semi-elliptical springs
Suspension rear: rigid axle, two cast housing halves which accommodate the differential gear and the two drive shafts, cross two push rods, transverse leaf springs
Rear axle: live semi-floating type
Differential: spiral bevel 3.64:1
Wheels: wooden Artillery type
Tires front: 30 x 3 pneumatic clincher type
Tires raer: 30 x 3½ pneumatic clincher type
Options: "Rocky Mountain Brakes" (external band brakes only on the rear axle), balloon tires with steel wires reinforcing the tire bead (from 1925), steel welded-spoke wheels available in 1926 and 1927

Special:
– On October 1, 1908, the company introduced the successful Ford Model T (also known as Tin Lizzie, Tin Lizzy, T‑Model Ford, Model T or T), designed by Childe Harold Wills, Joseph A. Galamb and Eugene Farkas.
– At first assembled in Piquette plant and from 1910 in the Highland Park plant.
– It was Fords first mass production car (instead of individual hand crafting). The chassis was drawn by workers on a carriage trough the factory. Later, the sleds were replaced by carts on rails and mechanically drawn ("electric lines").
– This was not the first production line with completely interchangeable parts ever (that was Olds Motor Works, Lansing, Michigan – USA with the Model R Curved Dash), but it was the first time an entire plant worked with this system.
– The bodies were still from other manufacturers until 1919, notably OJ Beaudette and Kelsey.
– It was America’s first automobile with standard left hand steering, while driving on the right was "the right way".
– The Ts in-line engine was the first engine with a removable cylinder head.
– The parking brake works on the tie rods to the drum brakes on the rear axle.
– The Model T’s built prior to 1919 were supplied with non-demountable wheels. This meant that if a flat tire occurred, the tire had to be removed from the rim and a new tube installed. In 1919, demountable wheels were available which allowed for a …

Ford Model T Touring 1914 (8367)

Ford Model T Touring 1914 (8367)

Manufacturer: Ford Motor Company, Dearborn, Michigan – U.S.A.
Type: Model T Touring
Engine: 2896cc straight-4
Power: 22 bhp / 1.600 rpm
Speed: 72 km/h
Production time: 1908 – 1927
Production outlet: 15,458,781
Curb weight: 750 kg

Special:
– On October 1, 1908, the company introduced the successful Ford Model T (also known as Tin Lizzie, Tin Lizzy, T‑Model Ford, Model T, or T), designed by Childe Harold Wills, Joseph A. Galamb and Eugene Farkas,
– At first assembled in Piquette plant and from 1910 in the Highland Park plant.
– It was Fords first mass production car (instead of individual hand crafting). The chassis was drawn by workers on a carriage trough the factory. Later, the sleds were replaced by carts on rails and mechanically drawn ("electric lines").
– This was not the first production line with completely interchangeable parts ever (that was Olds Motor Works, Lansing, Michigan – USA with the Model R Curved Dash), but it was the first time an entire plant worked with this system.
– The bodies were still to 1919 from other manufacturers, notably OJ Beaudette and Kelsey.
– It was Americas first automobile with standard left hand steering, while driving on the right was "the right way".
– The ignition system used an unusual trembler coil system to drive the spark plugs (used only for stationary gas engines) but made the T more flexible to use a range of fuels, like gasoline, kerosene or ethanol.
– The Ts in-line engine was the first engine with a removable cylinder head.
– The transmission is a standard two-speed planetary unit with a magneto located in front of the flywheel. This magneto supplied ignition current generated in a set of stationary coils.
– One had to have special driving techniques in order to keep the planetary gearing under control. So in many States you needed an extra / special driver’s licence.
– The early models had a foot-operated transmission brake and hand-operated rear wheel mechanical drum brakes.
– An option were the "Rocky Mountain Brakes", additional external band brakes only on the rear axle.
– The parking brake works on the tie rods to the drum brakes on the rear axle.
– The suspension employed a transversely mounted semi-elliptical spring for each of the front and rear beam axles which allowed a great deal of wheel movement to cope with the dirt roads of the time.
– The Model T’s built prior to 1919 were supplied with non-demountable wheels. This meant that if a flat tire occurred, the tire had to be removed from the rim and a new tube installed. In 1919, demountable wheels were available which allowed for a spare rim with the tire attached to be carried.
– The wheels were wooden artillery wheels with pneumatic clincher type tires, with steel welded-spoke wheels available in 1926 and 1927.
– Balloon tires with steel wires reinforcing the tire bead became available in 1925.
– Henry Ford: “Any customer can have a car painted any …

Ford Model T Touring 1912 (8551)

Ford Model T Touring 1912 (8551)

Manufacturer: Ford Motor Company, Dearborn, Michigan – U.S.A.
Type: Model T Touring
Engine: 2896cc straight-4
Power: 20 bhp / 1.600 rpm
Speed: 72 km/h
Production time: 1908 – 1927
Production outlet: 15,458,781
Curb weight: 720 kg

Special:
– On October 1, 1908, the company introduced the successful Ford Model T (also known as Tin Lizzie, Tin Lizzy, T‑Model Ford, Model T, or T), designed by Childe Harold Wills, Joseph A. Galamb and Eugene Farkas,
– At first assembled in Piquette plant and from 1910 in the Highland Park plant.
– It was Fords first mass production car (instead of individual hand crafting). The chassis was drawn by workers on a carriage trough the factory. Later, the sleds were replaced by carts on rails and mechanically drawn ("electric lines").
– This was not the first production line with completely interchangeable parts ever (that was Olds Motor Works, Lansing, Michigan – USA with the Model R Curved Dash), but it was the first time an entire plant worked with this system.
– The bodies were still to 1919 from other manufacturers, notably OJ Beaudette and Kelsey.
– It was Americas first automobile with standard left hand steering, while driving on the right was "the right way".
– The ignition system used an unusual trembler coil system to drive the spark plugs (used only for stationary gas engines) but made the T more flexible to use a range of fuels, like gasoline, kerosene or ethanol.
– The Ts in-line engine was the first engine with a removable cylinder head.
– The transmission is a standard two-speed planetary unit with a magneto located in front of the flywheel. This magneto supplied ignition current generated in a set of stationary coils.
– One had to have special driving techniques in order to keep the planetary gearing under control. So in many States you needed an extra / special driver’s licence.
– The early models had a foot-operated transmission brake and hand-operated rear wheel mechanical drum brakes.
– An option were the "Rocky Mountain Brakes", additional external band brakes only on the rear axle.
– The parking brake works on the tie rods to the drum brakes on the rear axle.
– The suspension employed a transversely mounted semi-elliptical spring for each of the front and rear beam axles which allowed a great deal of wheel movement to cope with the dirt roads of the time.
– The Model T’s built prior to 1919 were supplied with non-demountable wheels. This meant that if a flat tire occurred, the tire had to be removed from the rim and a new tube installed. In 1919, demountable wheels were available which allowed for a spare rim with the tire attached to be carried.
– The wheels were wooden artillery wheels with pneumatic clincher type tires, with steel welded-spoke wheels available in 1926 and 1927.
– Balloon tires with steel wires reinforcing the tire bead became available in 1925.
– Henry Ford: “Any customer can have a car painted any …

Ford Product T Touring Sort T1 1912 (8059)

Ford Model T Touring Type T1 1912 (8059)

Manufacturer: Ford Motor Enterprise, Dearborn, Michigan – U.S.A.
Sort: Product T Touring Sort T1
Manufacturing time: 1908 – 1914
Manufacturing outlet: fifty,598 (1912: all Touring styles)
Manufacturing outlet: 68,773 (1912: all styles)
Manufacturing outlet: 506,225 (1908-1914: all Typ T1 styles)
Manufacturing outlet: fifteen,458,781 (1908-1927: all styles)
Motor: 2896cc straight-4 aspect valves flathead, L-block, L-head
Power: twenty bhp / one.600 rpm
Drivetrain: rear wheels
Velocity: 68 km/h
Suppress fat: 710 kg
Wheelbase: one hundred inch
Chassis: direct frame created of riveted U-steel profiles on a wooden skeleton with individual metallic planking system
Steering: planetary epicyclic gear
Gearbox: handbook two-speed planetary device with a magneto positioned in front of the flywheel (this magneto supplied ignition current generated in a established of stationary coils)
Clutch: a number of dry plate disc
Carburettor: Ford
Fuel tank: 38 liter (case gas method: gravity type, no pump)
Electric method: six Volts
Ignition method: solitary trembler coil
Brakes front: non
Brakes rear: hand-operated mechanical drums
Brakes: exterior braking on the driveshaft
Suspension front: beam axle, cross two drive rods, transversely mounted semi-elliptical springs
Suspension rear: beam axle, two cast housing halves which accommodate the differential gear and the two travel shafts, cross two drive rods, transverse leaf springs
Rear axle: live semi-floating type
Differential: shaft
Wheels: wooden Artillery type
Tires front: 30 x 3 pneumatic clincher type
Tires raer: 30 x 3½ pneumatic clincher type
Selections: “Rocky Mountain Brakes” (exterior band brakes only on the rear axle), balloon tires with steel wires reinforcing the tire bead (from 1925), steel welded-spoke wheels readily available in 1926 and 1927

Exclusive:
– On Oct one, 1908, the firm released the prosperous Ford Product T (also regarded as Tin Lizzie, Tin Lizzy, T‑Model Ford, Product T or T), intended by Childe Harold Wills, Joseph A. Galamb and Eugene Farkas.
– At initial assembled in Piquette plant and from 1910 in the Highland Park plant.
– It was Fords initial mass generation car or truck (as a substitute of person hand crafting). The chassis was drawn by personnel on a carriage trough the factory. Later, the sleds have been replaced by carts on rails and mechanically drawn (“electrical lines”).
– This was not the initial generation line with entirely interchangeable areas ever (that was Olds Motor Operates, Lansing, Michigan – Usa with the Product R Curved Sprint), but it was the initial time an whole plant labored with this method.
– The bodies have been nevertheless from other suppliers right up until 1919, notably OJ Beaudette and Kelsey.
– It was Americas initial automobile with normal left hand steering, though driving on the suitable was “the suitable way”.
– The Ts in-line motor was the initial motor with a removable cylinder head.
– The parking brake operates on the tie rods to the drum brakes on the rear axle.
– The Product T’s built prior to 1919 have been supplied with non-demountable wheels. This intended that if a flat tire occurred, the tire experienced to be eliminated from the rim and a …