Ford Model A Type 82B Closed Cab Pick-Up 1930 (8265)

Ford Model A Type 82B Closed Cab Pick-Up 1930 (8265)

Manufacturer: Ford Motor Company, Dearborn, Michigan – U.S.A.
Type: Model A Type 82B Closed Cab Pick-Up Truck
Engine: 3236cc straight-4
Power: 39 bhp / 2.200 rpm
Speed: 97 km/h
Production time: 1927 – 1932
Production output: 4,849,340 (all A’s)
Curb weight: 1020 kg
Load capacity: 675 kg

Special:
– By switching production in 1927 from Model T to Model A, there were major delays.
– The A (also called A-Model Ford or the A, and A-bone among rodders and customizers) is a simple design with a L-Head 4-cylinder side-valve engine, Zenith carburettor, a three-speed manual gearbox (+ reverse), rear wheel drive and the traditional Ford suspension with transverse semi-elliptic leaf springs with Houdaille-type double-acting shock absorbers.
– The exterior has design cues taken from the Lincoln ("baby Lincoln"), heavily involved by Edsel Ford.
– The model was available in 30 body styles (icluding this Pick-Up Truck) and four standard colours, but not in black☺! Black however was an option.
– In contrast, the fenders were always painted black for manufacturing reasons.
– The Model A was the first Ford to use the standard set of driver controls with conventional clutch, throttle, gearshift and brake pedals.
– It was Fords first standard automobile with a new battery and ignition system, safety glass in the windshield and mechanical drum brakes on four wheels (cable operated).
– The A had a comfortable "dickey-seat" (in America "rumble seat"), in the earlier "coach period" intended for the footman. If it was not used, it could be folded shut.
– The 1930 and 1931 editions came with stainless steel radiator cowling and headlamp housings.
– The fuel tank was located in the cowl, between the engine compartment’s fire wall and the dash panel (with visual fuel gauge).
– The truck model was called Model AA. It had a longer chassis, strengthened suspension with steel instead of spokes wheels and dual tires for the heavier versions.
– The first station wagon was built by Stoughton Wagon Company in Stoughton, Wisconsin (USA) in 1919, mounted on a Ford Model T, because farmers (the first users) preferred them.
– Ford came with the first standard model "Woodie" based on a A Model in 1929. These body works were produced by Briggs in Detroit.
– In 1932 Ford surprised everyone by introducing a very cheap V-8 engine.
– The Model A formed the basis for the Russian car industry (Gorkovsky Avtomobilny Zavod (NAZ/GAZ) in Nizhny Novgorod)
– These early station wagons had different names, like "depot-wagons" or "hacks".
– Outside of the USA, the Model A was produced in plants in Argentina, Australia, Canada, Denmark, France, Germany, Ireland, Soviet Union and the United Kingdom and sold all over the world.

Photographed in Gaasterland, Fryslân – The Netherlands ☺!

Posted by Le Photiste on 2014-07-22 14:47:36

Tagged: , Ford Motor Company, Dearborn, Michigan – U.S.A. , Ford Model A , Ford Model A Type 82B Closed Cab Pick-Up , cf , Edsel Ford , a feast for my eyes , auto_focus …

Singer 10/26 Roadster 1925 (1849)

Singer 10/26 Roadster 1925 (1849)

Manufacturer: Singer & Co Limited (Singer Motors Limited in 1936), Coventry – UK
Type: 10/26 Roadster
Engine: 1308cc straight-4
Power: 26 bhp / 3.250 rpm
Speed: 72 km/h
Production time: 1924 – 1927
Production outlet: unknown
Curb weight: 830 kg

Special:
– At the time Singer was one of the most prolific manufacturers of motorcars in the UK. By 1928 Singer was Britain’s third largest car maker after Austin and Morris.
– The 10/26 replaced the earlier Singer 10 Model and was fairly advanced for its day. It is easier to drive than many other cars of the time.
– This two-seater with dicky seat has a four-speed manual gearbox + reverse operated by gate change mechanism, a bronze Solex downdraft carburettor, a central throttle pedal, a 12-Volts electric system, odometer, oil pressure gauge, amp meter, electric starter, a 32 liter fuel tank, coil ignition system and rear wheel drive.
– The ladder-frame chassis with steel body has a 90 inch wheelbase, worm & nut steering, original cloth wiring, ROTAX (London) head lights, side lights and switch box, quarter-elliptic leaf spring front suspension, longitudinal semi-elliptic leaf spring rear suspension, standard Dunlop Cord Five Grooved 50X19” tires and mechanical drum brakes all round (1925: the first year that the Singer featured 4-wheel brakes).
– A rear luggage rack, removable side windows/curtains, side mounted spare tires and a 2-gallon "SINGER" petrol can on the running board were optional.
– Both two- and four-seater open top models (Roadster and Tourer) were available, as well as Saloon and Coupé variants.

Posted by Le Photiste on 2015-09-04 08:18:16

Tagged: , Clay , Singer & Co Limited (Singer Motors Limited in 1936), Coventry – UK , 1925 Singer 10/26 Roadster , Singer 10/26 Roadster , cs , British Car , British Convertible , Convertible , AR-50-23 , Beilen – The Netherlands , The Netherlands , Artistic impressions , Beautiful capture , Creative Impuls , Digital Creations , Fine Gold , Hairygits Elite , LOVELY FLICKR , Masters of Creative Photography , Photographic World , Roadster , The Pit Stop Shop , Wheels-Anything That Rolls , Your Best of Today , A photographers view , All types of transport , ANTICANDO!!! , Auto_Focus , BEST PEOPLE’S CHOICE , A feast for my eyes , The Machines , THE LOOK level 1 RED , Blink again , CAZADORES DE IMÁGENES , All kinds of transport , Blood sweat and gear , GEARHEADS , GREATPHOTOGRAPHERS , Cars cars and more cars , Cars cars cars , Digifoto Pro , Django’s Master , Damn cool photographers , FAIR PLAY , Friends Forever , InfiniteXposure , IQ – Image Quality , Give me 5 , Living with Multiple Sclerosis (MS) , My friends pictures , PHOTOGRAPHERS , Nice as it gets , Planet Earth Transport , Planet Earth back in the day , Pro Photo , Slow ride , Showcase Images , Lovely shot , PhotoMix , Saariy’sQualityPictures , Transport of all kinds , The Red Group , Simply Because , …

Ford Comète Monte Carlo Coupé (5675)

Ford Comète Monte Carlo Coupé (5675)

Manufacturer: Ford Société Anonyme France (Ford SAF), Poissy / Paris – France
Type: Comète Monte Carlo Coupé 22CV
Engine: 3923cc Ford Flathead 239 V-8
Power: 105 bhp / 3.800 rpm
Speed: 156 km/h
Production time: 1954 – 1955
Production outlet: 699
Curb weight: 1470 kg

Special:
– This 2+2 seater fixed-head (notchback) Coupé was designed by Jean Daninos (Stabilimenti Industriali Giovanni Farina S.A., Torino – Italy, an older brother of the more famous Battista ‘Pinin’ Farina) and built by Facel Metallon SA, Paris – France (a French subsidiary of Ford), based on the French Ford Vedette with a Mercury chassis.
– At that time they were the most expensive Ford product in the world and the only Ford automobile with custom coachwork, although it didn’t even carry the Ford badge.
– Its V-8 engine, normally fitted to Ford trucks, but buyers didn’t like the idea of having a car with a "truck engine". High taxes and the high price (51% higher than a spacious four door Vendôme) didn’t made this model a “sales success”.
– During 1954, Ford SAF was sold and the Comète’s final year of production took place under Simca. The Simca Comète Monte-Carlo continued to be offered till July 1955.
– It has a three-speed manual gearbox, column shifter, a Zenith-Stromberg 32 DINX carburettor, a 63 liter fuel tank and rear wheel drive.
– The Facel chassis with steel body has a 106 inch wheelbase, MacPherson independent wheel axles, a large egg-crate grille (nicknamed “coupe-frites” or a “french-fry cutter” by the French), a fake hood scoop, a ribbed stainless steel dashboard, stainless steel door handles, an impressive jet-age three-spoked steering wheel, two-colour leather seat covers, steel wheels with chromed hubcaps and hydraulic drum brakes all round.
– A four-speed manual gearbox (pont-a-mousson gearbox) was optional, just like wire wheels, Dayton wheels and two-tone colouring.

Posted by Le Photiste on 2015-06-25 19:31:11

Tagged: , Clay , Ford Société Anonyme France (Ford SAF), Poissy / Paris – France , Ford Comète Monte Carlo Coupé , cf , French Automobile , French Sports Car , Jean Daninos , Stabilimenti Industriali Giovanni Farina S.A., Torino – Italy , Vianen – The Netherlands , Artistic impressions , Beautiful capture , Creative Impuls , Digital Creations , Fine Gold , Hairygits Elite , LOVELY FLICKR , Masters of Creative Photography , Photographic World , The Pit Stop Shop , Wheels-Anything That Rolls , Your Best of Today , A photographers view , All types of transport , ANTICANDO!!! , Auto_Focus , BEST PEOPLE’S CHOICE , A feast for my eyes , The Machines , THE LOOK level 1 RED , Blink again , CAZADORES DE IMÁGENES , All kinds of transport , Blood sweat and gear , GEARHEADS , GREATPHOTOGRAPHERS , Cars cars and more cars , Cars cars cars , Digifoto Pro , Django’s Master , Damn cool photographers , FAIR PLAY , Friends Forever , InfiniteXposure , IQ – Image Quality , Give me 5 , I Like It , I …

Cameron 16HP Runabout 1911(1050860)

Cameron 16HP Runabout 1911(1050860)

Manufacturer: Cameron Car Company, Beverly, Massachusetts – U.S.A.
Type: 16HP Runabout
Engine: 2369cc straight-4 air-cooled
Power: 16 bhp
Speed: unknown
Production time: 1903 – 1914
Production outlet: about 8,000
Curb weight: 454 kg

Special:
– Cameron Car Company is remembered for their air-cooled vehicles and for relocating often.
– At first at Rhode Island from 1902 to 1906, then in Brockton, Massachusetts from 1906 to 1908, then in Beverly, Massachusetts from 1909 to 1915, Norwalk, Connecticut in 1919, and finally in Stamford, Connecticut in 1920.
– Like many people in the exciting early days of the automobile industry, James E. Brown of the Brown Textile Machine Company in Pawtucket, Rhode Island, decided to go into the automobile manufacturing business in 1901. Everett S. Cameron was hired to designed the new vehicle. Experiments were conducted, improvements were made, and in 1903, Cameron automobile production began.
– No cars were produced from 1915 to 1918 (the company entered bankruptcy).
– During their career, they would produce trucks, tractors, marine, and aviation engines as well as cars and boats.
– The Runabout is probably designed by one of its founders, Everett S. Cameron.
– It has a three-speed manual gearbox, one carburetor and rear wheel drive (shaft driven).
– They had several innovate creations that would become industry standards, such as left-side (ight-hand drive was the accepted practice) steering wheels (wheel steering i.s.o. a tiller), front-mounted engines, air cooling, a revolutionary rear-mounted gearbox, the gear shift was mounted on the steering column and torque tube drive.
– With a lack of patent applications in the early days of production (as was the case with many manufacturers), it is unclear "who was first".
– Several Cameron’s were used in competition, including hill climbs and dirt track events. One example even captured a half-mile world record in Cincinnati, Ohio. Another example became the first air-cooled car to reach the top of Mount Washington without requiring a stop.
– Only 15 survivors.

Posted by Le Photiste on 2014-02-08 15:59:48

Tagged: , Cameron Car Company, Beverly, Massachusetts – U.S.A. , Cameron 16HP Runabout , cc , Brown Textile Machine Company in Pawtucket, Rhode Island, US , James E. Brown , Everett S. Cameron , a feast for my eyes , auto_focus , All types of transport , A Photographers View , Artistic impressions , blinkagain , beautiful capture , Build your rainbow , Creative Photo Group , Creative impuls , Cars cars and more cars , Cars Cars Cars , Creative Artists Cafe , digifoto Pro , Django’s Master , damn cool photographers , DREAMLIKE PHOTOS , Digital Creations , Friends Forever , Fan de Voitures , Fine gold , FotoArtCircle , gearheads , greatphotographers , ineffable , I like it , Kreative People , Love it , LOVELY FLICKR , Living with Multiple Sclerosis (MS) , my_gear_and_me , MAGIC MOMENTS IN YOUR LIFE , My Friends Pictures , Masters of Creative Photography , Nice as it gets , Photographic World , Planet Earth Transport , Planet …

Ford Model T Touring Type T1 1914 (2642)

Ford Model T Touring Type T1 1914 (2642)

Manufacturer: Ford Motor Company, Dearborn, Michigan – U.S.A.
Type: Model T Touring Type T1
Production time: 1908 – 1914
Production outlet: 165,832 (1914: all Touring models)
Production outlet: 202,667 (1914: all models)
Production outlet: 15,458,781 (1908-1927: all models)
Engine: 2896cc straight-4 Ford 177 CID Vertical L-head, L-block, side valves flathead
Power: 20 bhp / 1.600 rpm
Drivetrain: rear wheels
Speed: 68 km/h
Curb weight: 700 kg
Wheelbase: 100 inch
Chassis: lead frame made of riveted U-steel profiles on a wooden skeleton with separate metal planking body
Steering: planetary epicyclic gear
Gearbox: manual two-speed planetary unit with a magneto located in front of the flywheel (this magneto supplied ignition current generated in a set of stationary coils)
Clutch: multiple dry plate disc
Carburettor: Ford
Fuel tank: 38 liter (case fuel system: gravity type, no pump)
Electric system: 6 Volts
Ignition system: single trembler coil
Brakes front: non
Brakes rear: hand-operated mechanical external contracting drums
Brakes: external braking on the driveshaft
Suspension front: rigid axle, cross two push rods, transversely mounted semi-elliptical springs
Suspension rear: rigid axle, two cast housing halves which accommodate the differential gear and the two drive shafts, cross two push rods, transverse leaf springs
Rear axle: live semi-floating type
Differential: spiral bevel 3.64:1
Wheels: wooden Artillery type
Tires front: 30 x 3 pneumatic clincher type
Tires raer: 30 x 3½ pneumatic clincher type
Options: "Rocky Mountain Brakes" (external band brakes only on the rear axle), balloon tires with steel wires reinforcing the tire bead (from 1925), steel welded-spoke wheels available in 1926 and 1927

Special:
– On October 1, 1908, the company introduced the successful Ford Model T (also known as Tin Lizzie, Tin Lizzy, T‑Model Ford, Model T or T), designed by Childe Harold Wills, Joseph A. Galamb and Eugene Farkas.
– At first assembled in Piquette plant and from 1910 in the Highland Park plant.
– It was Fords first mass production car (instead of individual hand crafting). The chassis was drawn by workers on a carriage trough the factory. Later, the sleds were replaced by carts on rails and mechanically drawn ("electric lines").
– This was not the first production line with completely interchangeable parts ever (that was Olds Motor Works, Lansing, Michigan – USA with the Model R Curved Dash), but it was the first time an entire plant worked with this system.
– The bodies were still from other manufacturers until 1919, notably OJ Beaudette and Kelsey.
– It was America’s first automobile with standard left hand steering, while driving on the right was "the right way".
– The Ts in-line engine was the first engine with a removable cylinder head.
– The parking brake works on the tie rods to the drum brakes on the rear axle.
– The Model T’s built prior to 1919 were supplied with non-demountable wheels. This meant that if a flat tire occurred, the tire had to be removed from the rim and a new tube installed. In 1919, demountable wheels were available which allowed for a …