Ford Model T Touring Type T1 1914 (2642)

Ford Model T Touring Type T1 1914 (2642)

Manufacturer: Ford Motor Company, Dearborn, Michigan – U.S.A.
Type: Model T Touring Type T1
Production time: 1908 – 1914
Production outlet: 165,832 (1914: all Touring models)
Production outlet: 202,667 (1914: all models)
Production outlet: 15,458,781 (1908-1927: all models)
Engine: 2896cc straight-4 Ford 177 CID Vertical L-head, L-block, side valves flathead
Power: 20 bhp / 1.600 rpm
Drivetrain: rear wheels
Speed: 68 km/h
Curb weight: 700 kg
Wheelbase: 100 inch
Chassis: lead frame made of riveted U-steel profiles on a wooden skeleton with separate metal planking body
Steering: planetary epicyclic gear
Gearbox: manual two-speed planetary unit with a magneto located in front of the flywheel (this magneto supplied ignition current generated in a set of stationary coils)
Clutch: multiple dry plate disc
Carburettor: Ford
Fuel tank: 38 liter (case fuel system: gravity type, no pump)
Electric system: 6 Volts
Ignition system: single trembler coil
Brakes front: non
Brakes rear: hand-operated mechanical external contracting drums
Brakes: external braking on the driveshaft
Suspension front: rigid axle, cross two push rods, transversely mounted semi-elliptical springs
Suspension rear: rigid axle, two cast housing halves which accommodate the differential gear and the two drive shafts, cross two push rods, transverse leaf springs
Rear axle: live semi-floating type
Differential: spiral bevel 3.64:1
Wheels: wooden Artillery type
Tires front: 30 x 3 pneumatic clincher type
Tires raer: 30 x 3½ pneumatic clincher type
Options: "Rocky Mountain Brakes" (external band brakes only on the rear axle), balloon tires with steel wires reinforcing the tire bead (from 1925), steel welded-spoke wheels available in 1926 and 1927

Special:
– On October 1, 1908, the company introduced the successful Ford Model T (also known as Tin Lizzie, Tin Lizzy, T‑Model Ford, Model T or T), designed by Childe Harold Wills, Joseph A. Galamb and Eugene Farkas.
– At first assembled in Piquette plant and from 1910 in the Highland Park plant.
– It was Fords first mass production car (instead of individual hand crafting). The chassis was drawn by workers on a carriage trough the factory. Later, the sleds were replaced by carts on rails and mechanically drawn ("electric lines").
– This was not the first production line with completely interchangeable parts ever (that was Olds Motor Works, Lansing, Michigan – USA with the Model R Curved Dash), but it was the first time an entire plant worked with this system.
– The bodies were still from other manufacturers until 1919, notably OJ Beaudette and Kelsey.
– It was America’s first automobile with standard left hand steering, while driving on the right was "the right way".
– The Ts in-line engine was the first engine with a removable cylinder head.
– The parking brake works on the tie rods to the drum brakes on the rear axle.
– The Model T’s built prior to 1919 were supplied with non-demountable wheels. This meant that if a flat tire occurred, the tire had to be removed from the rim and a new tube installed. In 1919, demountable wheels were available which allowed for a …

Cameron 16HP Runabout 1911 (1050862)

Cameron 16HP Runabout 1911 (1050862)

Manufacturer: Cameron Car Company, Beverly, Massachusetts – U.S.A.
Type: 16HP Runabout
Engine: 2369cc straight-4 air-cooled
Power: 16 bhp
Speed: unknown
Production time: 1903 – 1914
Production outlet: about 8,000
Curb weight: 454 kg

Special:
– Cameron Car Company is remembered for their air-cooled vehicles and for relocating often.
– At first at Rhode Island from 1902 to 1906, then in Brockton, Massachusetts from 1906 to 1908, then in Beverly, Massachusetts from 1909 to 1915, Norwalk, Connecticut in 1919, and finally in Stamford, Connecticut in 1920.
– Like many people in the exciting early days of the automobile industry, James E. Brown of the Brown Textile Machine Company in Pawtucket, Rhode Island, decided to go into the automobile manufacturing business in 1901. Everett S. Cameron was hired to designed the new vehicle. Experiments were conducted, improvements were made, and in 1903, Cameron automobile production began.
– No cars were produced from 1915 to 1918 (the company entered bankruptcy).
– During their career, they would produce trucks, tractors, marine, and aviation engines as well as cars and boats.
– The Runabout is probably designed by one of its founders, Everett S. Cameron.
– It has a three-speed manual gearbox, one carburetor and rear wheel drive (shaft driven).
– They had several innovate creations that would become industry standards, such as left-side (ight-hand drive was the accepted practice) steering wheels (wheel steering i.s.o. a tiller), front-mounted engines, air cooling, a revolutionary rear-mounted gearbox, the gear shift was mounted on the steering column and torque tube drive.
– With a lack of patent applications in the early days of production (as was the case with many manufacturers), it is unclear "who was first".
– Several Cameron’s were used in competition, including hill climbs and dirt track events. One example even captured a half-mile world record in Cincinnati, Ohio. Another example became the first air-cooled car to reach the top of Mount Washington without requiring a stop.
– Only 15 survivors.

Added to the gallery www.flickr.com/photos/zak3000/galleries/72157640549068673

Posted by Le Photiste on 2014-02-08 15:59:45

Tagged: , Cameron Car Company, Beverly, Massachusetts – U.S.A. , Cameron 16HP Runabout , cc , Brown Textile Machine Company in Pawtucket, Rhode Island, US , James E. Brown , Everett S. Cameron , a feast for my eyes , auto_focus , All types of transport , A Photographers View , blinkagain , Build your rainbow , beautiful capture , Creative Artists Cafe , Cars cars and more cars , Cars Cars Cars , Creative impuls , Creative Photo Group , digifoto Pro , Digital Creations , DREAMLIKE PHOTOS , Django’s Master , damn cool photographers , Friends Forever , FotoArtCircle , Fine gold , Fan de Voitures , greatphotographers , gearheads , ineffable , I like it , Love it , LOVELY FLICKR , Living with Multiple Sclerosis (MS) , my_gear_and_me , Masters of Creative Photography , My Friends Pictures , Nice as it gets , Photographic World , Photoshop Artists , PHOTOGRAPHERS , Planet Earth Transport , paint creations , …

Porsche 356A 1500 GS Carrera GT 1957 (front)

Porsche 356A 1500 GS Carrera GT 1957 (front)

Manufacturer: Dr. Ing. h.c. F. Porsche AG, Stuttgart-Zuffenhausen – Germany
Type: 356 A 1500 GS Carrera GT
Engine: 1498cc 4-cylinder boxer
Power: 110 bhp / 6.400 rpm
Speed: 201 km/h
Production time: 1957 – 1958
Production outlet: 700
Curb weight: 930 kg

Special:
– It was designed and fabricated by Ferdinand ("Ferry") Porsche, the son of well-known Dr. Ing Ferdinand Porsche, founder of Porsche.
– The concept of of "Project 356" was then styled by Irwin Komenda.
– The T2 model (356A model) was presented in 1957 at the traditional platform for the German car industry: the Frankfurt Messe.
– The name "356" was chosen as it was the 356th project off the Porsche design desk (in Gmünd/Kärnten, Austria).
– The GS-GT (Grand Sport – Grand Touring) was named Carrera in honor of the Mexican Carrera Panamaracana where Porsche Spyders had done so well.
– This 2+2 Coupé has a flat air-cooled boxer, race-bred 4-cam roller bearing engine in the back, two Weber DCMZ carburetors and a four-speed manual gearbox.

Posted by Le Photiste on 2013-12-30 10:51:39

Tagged: , Dr. Ing. h.c. F. Porsche AG, Stuttgart-Zuffenhausen – Germany , Porsche 356A 1500 GS Carrera GT , Ferdinand (Ferry) Porsche , Project 356 , Grand Sport – Grand Touring , Gmünd/Kärnten, Austria , Mexican Carrera Panamaracana , Irwin Komenda , cp , a feast for my eyes , auto_focus , A Photographers View , All types of transport , Art of Images , Artistic impressions , blinkagain , Build your rainbow , beautiful capture , Creative Photo Group , Cars Cars Cars , Cars cars and more cars , Creative impuls , digifoto Pro , DREAMLIKE PHOTOS , damn cool photographers , Django’s Master , Digital Creations , Friends Forever , FotoArtCircle , Fine gold , Fan de Voitures , greatphotographers , gearheads , ineffable , I like it , Love it , LOVELY FLICKR , Living with Multiple Sclerosis (MS) , my_gear_and_me , MAGIC MOMENTS IN YOUR LIFE , My Friends Pictures , Masters of Creative Photography , Nice as it gets , Photographic World , Planet Earth Back In The Day , Photoshop Artists , Planet Earth Transport , PHOTOGRAPHERS , PRO PHOTO , Photo Art , paint creations , Remember that moment , SOE , Show Case , showroom , Super Six , Super Six bronze , slow ride , SIMPLY SUPERB , The Look Level red , TAKEN WITH LOVE , The Best Shot , The Machines , Transport of all kinds , TAKEN WITH HARD WORK , The Pit Stop Shop , VIGILANT PHOTOGRAPHERS UNITE , Wheels-Anything That Rolls , worldcars …

Chevrolet Bel Air Sedan 1975 (5884)

Chevrolet Bel Air Sedan 1975 (5884)

Manufacturer: Chevrolet Division of General Motors LLC, Detroit – U.S.A.
Type: Bel Air Series 1BK model 1K69 4-door Sedan
Production time: September 1974 – September 1975
Production outlet: 13,168
Engine: 5733cc GM Chevrolet L65 (Small-Block V-8 350)
Power: 145 bhp / 3.800 rpm
Torque: 339 Nm / 2.200 rpm
Drivetrain: rear wheel drive
Speed: 165 km/h
Curb weight: 2025 kg
Wheelbase: 121.5 inch
Chassis: GM B-platform box frame with crossbars and all-steel unibody (by Fisher)
Steering: ball-race servo control variable-ratio power
Gearbox: GM Turbo Hydramatic three-speed automatic transmission / steering column shift
Clutch: not applicable
Carburettor: Rochester 2GV dual downdraft
Fuel tank: 98 liter
Electric system: distributor and coil
Ignition system: 12 Volts 61 Ah
Brakes front: 11.86 inch servo-assisted hydraulic discs
Brakes rear: 11 inch hydraulic self-adjusting drums
Suspension front: independent ball joint, Cross-link with elastically mounted tension strut, upper trapezoid triangle cross-bars, lower single cross-bars, sway bar, coil springs +
Suspension rear: beam axle, coil link system, posterior longitudinal axis with helical springs, lower longitudinal guide arms and upper differential slanting braces +
Rear axle: live semi-floating type
Differential: hypoid 3.08:1
Wheels: 6K – 15 inch steel discs
Tires: HR78 x 15B
Options: 6573cc GM Chevrolet Small-Block V-8 400 petrol engine, 7443cc GM Chevrolet L-series 454 V-8 (big-block) petrol engine, power windows, power brakes, power seats, 50/50 reclining passenger seat, power door locks, power trunk opener, comfort-tilt steering wheel, adjustable steering wheel, remote control outside rear view mirrors, AM/FM Stereo radio with tape system, rear seat speaker, Four-Season Air Conditioning, Soft-Ray tinted glass, intermittent windshield whiper system, rear window defogger, auxiliary lighting, econominder gauge package, Cruise-Master speed control, custom DeLuxe seat belts, DeLuxe wheel covers, Rally wheels, body side molding, white stripe steel-belted radial ply tires, DeLuxe bumpers, bumper guards, colour-keyed floor mats

Special:
– Chevrolet was co-founded by Louis Chevrolet and William C. Durant. Louis Chevrolet was a race-car driver, born on December 25, 1878, in La Chaux de Fonds, Switzerland. William Durant, founder of General Motors, had been forced out of GM in 1910 and wanted to use Louis Chevrolet’s designs to rebuild his own reputation as a force in the automobile industry. As head of Buick Motor Company, prior to founding GM, Durant had hired Chevrolet to drive Buicks in promotional races.
– By 1916 Chevrolet was profitable enough to allow Durant to buy a majority of shares in GM. After the deal was completed in 1917, Durant was president of General Motors and Chevrolet was merged into GM, becoming a separate division.
– When the Biscayne was discontinued after 1972, the Bel Air was demoted to the low-level model.
– This seventh generation Bel Air (1971-1975) was the last production Series of the Bel Air in the USA.
– Canada introduced the eighth generation Bel Air (1977-1981), being a Canadian market-only 2-door Hardtop: the Bel Air Sport Coupé, based on the Impala Sport Coupé assembled in Baltimore, Maryland (USA), Flint, Michigan (USA) and in Oshawa, Ontario (Canada).
– In 2002, a concept Bel Air …

Ford Model A Phaeton Standard 1928* (3458)

Ford Model A Phaeton Standard 1928* (3458)

* with some model ’29 modifications like the outboard door handles

Manufacturer: Ford Motor Company, Dearborn, Michigan – U.S.A.
Type: Model A Phaeton Standard Model 35A
Production time: 1927 – 1929 (model 35A)
Production time: 1930 – 1932 (model 35B)
Production time: 1927 – 1932 (all Model A’s)
Production outlet: 97,094 (all Phaeton Standard Model 35A)
Production outlet: 20,855 (all Phaeton Standard Model 35B)
Production outlet: 4,849,340 (all Model A’s)
Engine: 3286cc straight-4 L-head
Power: 40 bhp / 2.200 rpm
Torque: 173 Nm / 1.000 rpm
Drivetrain: rear wheels
Speed: 105 km/h
Curb weight: 1020 kg
Wheelbase: 103.5 inch
Chassis: A – chassis with separate steel body
Steering: worm & sector
Gearbox: sliding three-speed manual + reverse / unsynchronised / floor shifter
Clutch: 9 inch multiple disk – dry plate
Carburettor: Zenith
Fuel tank: 38 liter
Electric system: 6 Volts
Ignition system: distributor and coil
Brakes front: mechanical internal expanding 11 inch drums
Brakes rear: mechanical internal expanding 11 inch drums
Suspension front: transverse leaf springs + Houdaille-type double-acting shock absorbers
Suspension rear: transverse, semi-elliptic leaf springs + Houdaille-type double-acting shock absorbers
Rear axle: rigid 3/4 floating type
Differential: spiral bevel
Wheels: welded Ford steel spoke
Tires: 4.5 x 30 balloon

Special:
– The exterior has design cues taken from the Lincoln ("baby Lincoln"), heavily involved by Edsel Ford.
– The Model A was the first Ford to use the standard set of driver controls with conventional clutch, throttle, gearshift and brake pedals, a new battery and ignition system, safety glass in the windshield and mechanical drum brakes on four wheels (cable operated).
– The fuel tank was located in the cowl, between the engine compartment’s fire wall and the dash panel (with visual fuel gauge) and had a comfortable "dickey-seat" (in America "rumble seat"), in the earlier "coach period" intended for the footman. If it was not used, it could be folded shut.
– The 1930 and 1931 editions came with stainless steel radiator cowling and headlamp housings.
– The Model A (also called A-Model Ford or the A, and A-bone among rodders and customizers) was available in 30 body styles and four standard colours, but not in black☺! Black however was an option.
– The Model A formed the basis for the Russian car industry (Gorkovsky Avtomobilny Zavod (NAZ/GAZ) in Nizhny Novgorod).
– Outside of the USA, the Model A was produced in plants in Argentina, Australia, Canada, Denmark, France, Germany, Ireland, Soviet Union and the United Kingdom and sold all over the world.

Posted by Le Photiste on 2016-02-22 18:17:50

Tagged: , Clay , Ford Motor Company, Dearborn, Michigan – U.S.A. , Ford Model A Phaeton Standard Model 35A , cf , 1929 , American Oldtimer , American automobile , phaeton , AR-71-86 , Sidecode-1 , Appelscha – The Netherlands , Fryslân – The Netherlands , The Netherlands , Artistic impressions , Beautiful capture , Creative Impuls , Digital Creations , Fine Gold , Hairygits Elite , LOVELY FLICKR , Masters Of Creative Photography , Photographic World …