The Best Used Cars In The World for 10 Grand — /ROAD TESTAMENT



You picked them, we’re talking about them. It’s the best, most DRIVE-worthy used cars you can get for around 10 grand. Which ones did we miss? Comment below.

source

BMW Service Shop Boca Raton

BMW Service Shop Boca Raton

BMW Service Shop Boca Raton. Shores Automotive in Boca Raton is your dealer alternative. We service and repair all European cars including Mercedes Benz, BMW, Jaguar, Audi, Volkswagen and more.

Our technicians treat your car as if it were their own. We stand behind every repair too. At Shores Automotive we do not work on commission we work on customer satisfaction.

Posted by Shores Automotive on 2013-04-07 18:40:48

Tagged: , BMW Service Shop Boca Raton , BMW Service , BMW Repair Boca Raton …

A Guide to Fuel Injector Cleaning – Methods and Precautions

The purpose of fuel injector cleaning is to remove the buildup of fuel varnish deposits and contaminants that clog injectors and affect their operation. They need periodic cleaning for optimal operation. Experts recommend fuel injector cleaning every 25,000 to 30,000 miles or once a year.

Fuel injector cleaning not only improves functionality but also helps restore and improve engine’s performance, reduce emissions and improve fuel economy.

One good thing in fuel injector cleaning is you can do it all by yourself, without the help of an auto mechanic. However, if the injector is badly clogged, you may need to take his help. Let’s take a look at the different methods used in the cleaning.

Method#1: Using fuel injector cleaning kits

Fuel injector cleaning kits are available at any auto supply store. Before connecting the kit, locate the fuel injector and take measures to prevent fuel entering the injectors. You can do this either by using tubing to bypass the fuel injector so that the fuel returns to the tank or by removing the fuel pump and blocking the fuel return line. Once it is done, disconnect the fuel pressure regulator.

Now, connect the cleaning kit to the fuel input port and remove fuel cap of the tank to release any pressure in the tank that may built up by the kit. Open the cleaning kit’s valve till its pressure value matches with the injection pressure value (you can find injection pressure value of your car’s engine from the manual).

Once the cleaning kit reaches the required pressure value, start the engine so that the cleaning solvent passes from the kit through the injector and removes the dirt and debris that clogged the fuel injector. This will take a few minutes. Once it is done, switch off the engine, remove the kit and reconnect the fuel lines, fuel pump and fuel pressure regulator. With this, the cleaning job is done. You can notice significant difference in your engine’s performance after the clean-up.

Method#2: Adding cleaner additives to the fuel

Adding cleaner additives, also called as detergents or deposit-control additives, to the fuel helps to control the dirt and debris accumulation in the fuel tank. These additives help reduce the volatility of lighter components of the fuel. Though, the fuel from gas stations do contain certain additives, some suppliers may not add the required amount of detergents; some even use use low cost, less effective alternatives. So, you need to add additional additives to fuel.

One of the commonly used best additives is polyetheramine (PEA). Though it is a bit expensive compared to others, it is proved to be effective in keeping the injectors, valves and combustion chamber clean and it does not require any additional fluidizers.

Method#3: Manual cleaning

On-car cleaning may not be that effective for a badly clogged injector because it cannot pass the cleaning solvent during the cleaning cycle. So, when on-car cleaning doesn’t work you can for off-car cleaning, which involves removing the injector from the vehicle …